Rig zherlitsy don pike

Mafarauci ya amsa da kyau ga raye-raye a matsayin koto, wannan an daɗe ana lura da shi ta hanyar magudanar ruwa, bisa ga wannan fasalin, an ƙirƙira hanyoyi daban-daban na kama ta amfani da wannan nau'in, gami da nau'ikan pike iri-iri. Kayan aiki zherlitsy don pike a cikin hunturu yana da halaye na kansa, wanda ya kamata a yi la'akari da lokacin tattara kaya. Na gaba, za mu gano yadda za mu yi daidai.

Menene zherlitsa

Akwai hanyoyi da yawa don kama mafarauci, musamman pike. Ga wasu, kaɗa da kamun kifi suna da fifiko, yayin da wasu sun fi son kamun kifi a ƙarshen kaka tare da raye-raye. Magoya bayan kamun kifi na kifaye suna da masaniya game da irin wannan tuntuɓar kamar iska, yana da kyau don kama pike.

Ya kamata mafari ya bayyana dalla-dalla menene kuma menene ka'idojin kama wannan maganin. Ana kiran Zherlitsa tackle don tafkunan kamun kifi galibi daga kankara, duk da haka, akwai nau'ikan kamun kifi a cikin budadden ruwa. Ma'anar aikin ƙugiya shine cewa lokacin cizo, alamar sigina ta tashi, kawai sai mai kusurwa ya kusanci kayan da aka kunna. Duk wani nau'in girders, ko da bazara ko hunturu, yana da abubuwa iri ɗaya:

Bugu da ƙari, za ku buƙaci ƙarin kayan haɗi, waɗanda kowane ƙwanƙwasa ya riga ya zaɓa daban-daban. Ƙunƙarar da kanta tana haɗuwa a kan coil, wanda aka haɗa ta hanyoyi daban-daban zuwa tushe mai zagaye. Wani abu mai mahimmanci shine tuta, kuma an sanya shi a ƙasan nada.

Yanzu zaku iya siyan madaidaicin cikin sauƙi a kowane kantin sayar da kayan kamun kifi, har ma an haɗa su da layin kamun kifi da ƙugiya. Amma masu kama da gaske sun fi son aiwatar da kayan aiki da kansu, a hankali suna zaɓar duk abubuwan da aka haɗa bisa ga wasu halaye.

Lokacin da kuma inda suka kama zherlitsy

An shigar da wannan kayan aiki a cikin wuraren ajiye motoci na kifi, dangane da yanayi. Zai yiwu daidai da nasarar kama duka ramuka na hunturu da shallows a gefen kankara, babban abu shine auna zurfin nutsewar koto daidai.

Ana amfani da zherlitsa ga mafarauci:

• a cikin buɗaɗɗen ruwa a cikin kaka kusa da kurmin bakin teku na reeds da pondweed, a ƙofar ramin hunturu, a zurfin zurfi kafin daskarewa;
• ana gudanar da kamun kifi daga kankara a sassa daban-daban na tafki, ya fi dacewa da wane lokaci ake aiwatar da shigar da iska.

Ana ba da shawarar yin amfani da irin wannan maganin duka a kan tsayayyen ruwa na tafkuna da tafkuna, kuma a kan koguna, manyan tafkunan ruwa ma suna cikin wannan lambar. Kayan aikin za su bambanta a cikin kauri na layin kamun kifi na monofilament da sinker, in ba haka ba za a sami bambance-bambance a zahiri.

Hakanan ya kamata a yi la'akari da zurfin tafki da aka zaɓa, amma yin layin kamun kifi a cikin adadin 10-15 m ya isa sosai don kamun kifi.

Magoya bayan vents a kan ƙanƙara ta ƙarshe kuma suna alfahari da kamawa mai kyau, a wannan lokacin pre-spawing zhor yana farawa a pike, don haka da farin ciki ta ɗauki duk wani koto.

Nau'in girders

Tsarin girders na kowane yanayi iri ɗaya ne, amma za a sami wasu nuances a cikin tarin kayan aiki. Ya kamata a fahimci cewa don kamun kifi a cikin ruwa mai buɗewa, ana tattarawa da ƙarfi sosai, tunda pike kuma yana aiki a wannan lokacin. Don kamun kankara, ana iya yin abin da zai zama mai laushi, za a iya amfani da layi mai laushi azaman tushe, kuma ana iya sanya leash akan pike na fluorocarbon. Na gaba, za mu yi la'akari da dalla-dalla da dabara na tattara kayan aiki na kowane kakar daban.

Summer version da kayan aiki fasali

A cikin buɗaɗɗen ruwa, ba kowa ba ne ke kama pike a kan magudanar ruwa, mutane da yawa sun fi son yin amfani da rigs masu wucewa na nau'i daban-daban. Amma ƙwararru masu ƙwarewa, ko kuma kakanni a kan tafki, sun fi son irin wannan na'urar. Suna yin duk abubuwan da aka gyara da kansu, sannan suna aiwatar da shigarwa na vents akan pike. Dukkan tsari yayi kama da haka:

• an yanke da'irar daga wani yanki na plywood, diamita wanda yawanci shine 100-130 mm;
• shigar da dutse a ƙarƙashin tuta, yawanci ƙaramin ƙarfe na ƙarfe;
• isassun layin kamun kifi yana rauni akan reel, sa'an nan kuma an ɗora madaidaicin, sannan mai nutsewa na nauyin da ake buƙata, wani matsewa;
• an yi leash daban, don shi kuna buƙatar karfe ko fluorocarbon;
• ta hanyar swivel, leash ɗin da aka shirya tare da tef ko ninki biyu don koto mai rai ana haɗa shi zuwa layin kamun kifi;
• Hakanan ana sanya coil ɗin da ke da dunƙulewa ko tawul ɗin taɗa kai a ƙasa don ya sami wasa kyauta.

Ya rage kawai don yin koto da shigar da iska a wuri mafi dacewa na tafki da aka zaɓa.

Yadda za a hada maganin? Wadanne kayan da ake bukata a saya a gaba? A cikin kantin sayar da za ka iya saya shirye-shirye na iska taro, amma sayan kowane bangaren na kayan aiki ne kuma zai yiwu:

• a matsayin tushe, ya kamata a ba da fifiko ga layin kamun kifi, igiyar wannan kayan aiki ba ta dace sosai ba. Kauri zai bambanta daga 0,35 mm zuwa 06 mm, wannan mai nuna alama ya dogara da girman mafarauci da ke zaune a cikin tafki da aka zaɓa don kamun kifi.
• Leashes don girders pike sau da yawa ana siyan shirye-shirye, karfe, fluorocarbon, tungsten sune zaɓuɓɓuka masu kyau. Kevlar mai tsada kuma an sanye shi da ginshiƙai, amma galibi ana shakkar amincinsa. Zaɓi zaɓuɓɓuka don matsakaicin tsayi na 25 cm.
• Yana da wuya ga mai farawa ya yanke shawarar abin da ƙugiya zai sanya a kan tarko, a nan kowa ya zaɓa da kansa. Ga wani, tagwaye sune fifiko, wani yana son ƙarin tees, hanyar bait ɗin kuma zai dogara ne akan nau'in da aka zaɓa. Girman ƙugiya ana zabar bisa ga kifin koto mai rai, mafi girman kifin, girman girman ƙugiya.
• An saita ma'auni don ya iya kiyaye kullun rai a wani zurfin da aka ba shi, amma kada ya nutsar da shi. Don ruwa maras kyau tare da zurfin zurfi a cikin ruwa mai zurfi, ana amfani da tutoci daga 4 g zuwa 10 g, na yanzu zai yi nasa gyare-gyare, ana amfani da nauyin 6 g ko fiye a kan kogin.

Masu dakatarwa suna amfani da daidaitattun kayan aiki (swivel da clasp) don hawa leash mai matsakaicin girma tare da kayan karya mai kyau, wanda zai ɗan yi ƙasa da na babban layin kamun kifi.

Ƙaƙwalwar ƙasa don kamun kifi tafki a cikin ruwa mai buɗewa yana shirye, ya rage kawai don koto kifin da sauri, sanya takalmi a kan ruwa kuma jira tutar ta yi aiki.

Winter version da kayan aiki dokokin

Ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararru sun san yadda za su ba da kayan aiki don pike a cikin hunturu, amma masu farawa zasu buƙaci shawarwari da shawarwari. Bayan haka, kayan aikin da suka dace za su kasance mabuɗin samun nasarar yaƙin kofuna a lokacin daraja.

Don samuwar maganin hunturu, za a buƙaci abubuwa iri ɗaya kamar yadda yanayin bazara; tsari na iska don pike ba ya canza yanayi. Amma za su sami ɗanɗano halaye daban-daban, waɗanda suka bambanta sosai da na rani. Don iska mai sanyi a kan mafarauta, suna amfani da:

• Tushen ya kasance iri ɗaya, amma ana amfani da layin kamun kifi don vents pike a cikin hunturu tare da diamita daban-daban. Don kifin m, 0,25-0,35 mm zai isa. Idan babu shakka akwai kofuna fiye da 6 kg a cikin kandami, to yana da kyau a yi wasa da shi lafiya kuma ya tashi sama da diamita 0.
• An zaɓi kaya don girders bisa ga ka'ida kamar yadda yake a lokacin rani. Don kwarara, kuna buƙatar zaɓi mafi nauyi, amma har yanzu ruwa tare da zurfin matsakaici zai buƙaci gilashin 4-6 g.
• Dole ne a yi amfani da leashes don girders na hunturu, mafi kyawun zaɓi zai zama karfe, nau'i mai yawa tare da fluorocarbon. Kevlar a cikin wannan lokacin kuma zai iya jure wa mafarauci mai ruɗi ba tare da wata matsala ba.

Ana amfani da ƙugiya don tattara ƙwanƙwasa daidai da na rani, an zaɓi girman su bisa ga raye-raye.

Akwai nau'ikan vents da yawa don amfani da hunturu, sun bambanta da juna musamman kawai a cikin ka'idar ɗaure kan rami:

• mugs da aka yi da itace;
• gilashin filastik;
• kwalban roba;
• katako na katako;
• kafa uku.

Ba shi yiwuwa a ba da shawara don ba da fifiko ga kowane nau'in da aka jera. Dole ne kowa ya yanke shawarar wanda ya fi kyau.

Kayan aiki na iska na hunturu don pike ya bayyana a fili, ya rage kawai don jira mai karfi kankara kuma ya tafi kifi. Ana iya samun sakamako mai kyau na kamawa a cikin ƙanƙara ta farko, a wannan lokacin pike ba shi da hankali kuma yana ɗaukar kusan kowane kullun rayuwa.

Sirri na tattara takalmi a kan girders

Mun gano yadda za a tara zherlitsa don pike tare da siffofi na yanayi. Don samun nasara sakamakon kamun kifi, wannan bai isa ba, har yanzu kuna buƙatar sani da amfani da dabarar, wanda akwai da yawa. Yanzu za mu gane wasu daga cikinsu, amma a hankali a hankali zai zo ga sauran da kansa. Don kasancewa tare da kama yayin amfani da iska, kuna buƙatar sanin masu zuwa:

• don kayan aiki, an zaɓi koto mai rai mafi aiki tare da ƙarancin lalacewa;
• irin kifi ya dace da dasa shuki, roach kama a cikin tafki ɗaya;
• don yin riging ta hanyar tudu, yana da kyau a ɗauki tees, yayin da kullun rayuwa tare da ƙugiya da ke cikin wutsiya yana sanye da ninki biyu;
• sanye take da iska a kowane lokaci na shekara ba za a iya saita kamar yadda kuke so ba, dokar ta ba da damar sanya wuraren shakatawa na hunturu ga masunta daga 5 zuwa 10 guda, amma yana da kyau a duba lambar tare da kulawar kifi;
• a lokacin haifuwa, gabaɗaya haramun ne a yi amfani da irin wannan maganin, ya zama dole a la'akari da wannan;
• yana da kyau a zabi sinkers don tattarawa a cikin nau'i na zaitun, sun fi nutsar da su a cikin ruwa;
• don raƙuman ruwa na bazara, a kan shawarar masu cin abinci tare da kwarewa, yana da kyau a dauki madaidaicin silicone.

Ga sauran, kuna buƙatar duba sosai a cikin abokan gaba mafi ƙwarewa, lura da menene kuma yadda suke yi.

Ya zama bai zama da wahala ba don samar da iska don pike, abubuwan da ke akwai da sauƙin tattarawa sun sa wannan zaɓin kamun ya shahara tsakanin mutane da yawa.